Doxygen
|
A configuration file is a free-form ASCII text file with a structure that is similar to that of a Makefile
, with the default name Doxyfile
. It is parsed by doxygen
. The file may contain tabs and newlines for formatting purposes. The statements in the file are case-sensitive. Comments may be placed anywhere within the file (except within quotes). Comments beginning with two hash characters (##
) are kept when updating the configuration file and are placed in front of the TAG they are in front of. Comments beginning with two hash characters (##
) at the beginning of the configuration file are also kept and placed at the beginning of the file. Comments beginning with two hash characters (##
) at the end of the configuration file are also kept and placed at the end of the file. Comments begin with the hash character (#
) and ends at the end of the line.
The file essentially consists of a list of assignment statements. Each statement consists of a TAG_NAME
written in capitals, followed by the equal sign (=
) and one or more values. If the same tag is assigned more than once, the last assignment overwrites any earlier assignment. For tags that take a list as their argument, the +=
operator can be used instead of =
to append new values to the list. Values are sequences of non-blanks. If the value should contain one or more blanks it must be surrounded by quotes ("..."
). Multiple lines can be concatenated by inserting a backslash (\
) as the last character of a line. Environment variables can be expanded using the pattern $(ENV_VARIABLE_NAME)
.
You can also include part of a configuration file from another configuration file using a @INCLUDE
tag as follows:
@INCLUDE = config_file_name
The include file is searched in the current working directory. You can also specify a list of directories that should be searched before looking in the current working directory. Do this by putting a @INCLUDE_PATH
tag with these paths before the @INCLUDE
tag, e.g.:
@INCLUDE_PATH = my_config_dir
The configuration options can be divided into several categories. Below is an alphabetical index of the tags that are recognized followed by the descriptions of the tags grouped by category.
DOXYFILE_ENCODING
This tag specifies the encoding used for all characters in the configuration file that follow. The default is UTF-8 which is also the encoding used for all text before the first occurrence of this tag. Doxygen uses libiconv
(or the iconv built into libc
) for the transcoding. See https://www.gnu.org/software/libiconv/ for the list of possible encodings.
The default value is: UTF-8
.
PROJECT_NAME
The PROJECT_NAME
tag is a single word (or a sequence of words surrounded by double-quotes, unless you are using Doxywizard) that should identify the project for which the documentation is generated. This name is used in the title of most generated pages and in a few other places.
The default value is: My Project
.
PROJECT_NUMBER
The PROJECT_NUMBER
tag can be used to enter a project or revision number. This could be handy for archiving the generated documentation or if some version control system is used.
PROJECT_BRIEF
Using the PROJECT_BRIEF
tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.
PROJECT_LOGO
With the PROJECT_LOGO
tag one can specify a logo or an icon that is included in the documentation. The maximum height of the logo should not exceed 55 pixels and the maximum width should not exceed 200 pixels. Doxygen will copy the logo to the output directory.
OUTPUT_DIRECTORY
The OUTPUT_DIRECTORY
tag is used to specify the (relative or absolute) path into which the generated documentation will be written. If a relative path is entered, it will be relative to the location where doxygen was started. If left blank the current directory will be used.
CREATE_SUBDIRS
If the CREATE_SUBDIRS
tag is set to YES
then doxygen will create 4096 sub-directories (in 2 levels) under the output directory of each output format and will distribute the generated files over these directories. Enabling this option can be useful when feeding doxygen a huge amount of source files, where putting all generated files in the same directory would otherwise causes performance problems for the file system.
The default value is: NO
.
ALLOW_UNICODE_NAMES
If the ALLOW_UNICODE_NAMES
tag is set to YES
, doxygen will allow non-ASCII characters to appear in the names of generated files. If set to NO
, non-ASCII characters will be escaped, for example _xE3_x81_x84 will be used for Unicode U+3044.
The default value is: NO
.
OUTPUT_LANGUAGE
The OUTPUT_LANGUAGE
tag is used to specify the language in which all documentation generated by doxygen is written. Doxygen will use this information to generate all constant output in the proper language.
Possible values are: Afrikaans
, Arabic
, Armenian
, Brazilian
, Catalan
, Chinese
, Chinese-Traditional
, Croatian
, Czech
, Danish
, Dutch
, English
(United States), Esperanto
, Farsi
(Persian), Finnish
, French
, German
, Greek
, Hungarian
, Indonesian
, Italian
, Japanese
, Japanese-en
(Japanese with English messages), Korean
, Korean-en
(Korean with English messages), Latvian
, Lithuanian
, Macedonian
, Norwegian
, Persian
(Farsi), Polish
, Portuguese
, Romanian
, Russian
, Serbian
, Serbian-Cyrillic
, Slovak
, Slovene
, Spanish
, Swedish
, Turkish
, Ukrainian
and Vietnamese
.
The default value is: English
.
OUTPUT_TEXT_DIRECTION
The OUTPUT_TEXT_DIRECTION
tag is used to specify the direction in which all documentation generated by doxygen is written. Doxygen will use this information to generate all generated output in the proper direction.
Possible values are: None
, LTR
, RTL
and Context
.
The default value is: None
.
BRIEF_MEMBER_DESC
If the BRIEF_MEMBER_DESC
tag is set to YES
, doxygen will include brief member descriptions after the members that are listed in the file and class documentation (similar to Javadoc
). Set to NO
to disable this.
The default value is: YES
.
REPEAT_BRIEF
If the REPEAT_BRIEF
tag is set to YES
, doxygen will prepend the brief description of a member or function before the detailed description
Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO
, the brief descriptions will be completely suppressed.
The default value is: YES
.
ABBREVIATE_BRIEF
This tag implements a quasi-intelligent brief description abbreviator that is used to form the text in various listings. Each string in this list, if found as the leading text of the brief description, will be stripped from the text and the result, after processing the whole list, is used as the annotated text. Otherwise, the brief description is used as-is. If left blank, the following values are used ($name
is automatically replaced with the name of the entity): The $name class
, The $name widget
, The $name file
, is
, provides
, specifies
, contains
, represents
, a
, an
and the
.
ALWAYS_DETAILED_SEC
If the ALWAYS_DETAILED_SEC
and REPEAT_BRIEF tags are both set to YES
then doxygen will generate a detailed section even if there is only a brief description.
The default value is: NO
.
INLINE_INHERITED_MEMB
If the INLINE_INHERITED_MEMB
tag is set to YES
, doxygen will show all inherited members of a class in the documentation of that class as if those members were ordinary class members. Constructors, destructors and assignment operators of the base classes will not be shown.
The default value is: NO
.
FULL_PATH_NAMES
If the FULL_PATH_NAMES
tag is set to YES
, doxygen will prepend the full path before files name in the file list and in the header files. If set to NO
the shortest path that makes the file name unique will be used
The default value is: YES
.
STRIP_FROM_PATH
The STRIP_FROM_PATH
tag can be used to strip a user-defined part of the path. Stripping is only done if one of the specified strings matches the left-hand part of the path. The tag can be used to show relative paths in the file list. If left blank the directory from which doxygen is run is used as the path to strip.
Note that you can specify absolute paths here, but also relative paths, which will be relative from the directory where doxygen is started.
This tag requires that the tag FULL_PATH_NAMES is set to YES
.
STRIP_FROM_INC_PATH
The STRIP_FROM_INC_PATH
tag can be used to strip a user-defined part of the path mentioned in the documentation of a class, which tells the reader which header file to include in order to use a class. If left blank only the name of the header file containing the class definition is used. Otherwise one should specify the list of include paths that are normally passed to the compiler using the -I
flag.
SHORT_NAMES
If the SHORT_NAMES
tag is set to YES
, doxygen will generate much shorter (but less readable) file names. This can be useful is your file systems doesn't support long names like on DOS, Mac, or CD-ROM.
The default value is: NO
.
JAVADOC_AUTOBRIEF
If the JAVADOC_AUTOBRIEF
tag is set to YES
then doxygen will interpret the first line (until the first dot) of a Javadoc-style comment as the brief description. If set to NO
, the Javadoc-style will behave just like regular Qt-style comments (thus requiring an explicit @brief command for a brief description.)
The default value is: NO
.
JAVADOC_BANNER
If the JAVADOC_BANNER
tag is set to YES
then doxygen will interpret a line such as
/***************
as being the beginning of a Javadoc-style comment "banner". If set to NO
, the Javadoc-style will behave just like regular comments and it will not be interpreted by doxygen.
The default value is: NO
.
QT_AUTOBRIEF
If the QT_AUTOBRIEF
tag is set to YES
then doxygen will interpret the first line (until the first dot) of a Qt-style comment as the brief description. If set to NO
, the Qt-style will behave just like regular Qt-style comments (thus requiring an explicit \brief command for a brief description.)
The default value is: NO
.
MULTILINE_CPP_IS_BRIEF
The MULTILINE_CPP_IS_BRIEF
tag can be set to YES
to make doxygen treat a multi-line C++ special comment block (i.e. a block of //!
or ///
comments) as a brief description. This used to be the default behavior. The new default is to treat a multi-line C++ comment block as a detailed description. Set this tag to YES
if you prefer the old behavior instead.
Note that setting this tag to YES
also means that rational rose comments are not recognized any more.
The default value is: NO
.
INHERIT_DOCS
If the INHERIT_DOCS
tag is set to YES
then an undocumented member inherits the documentation from any documented member that it re-implements.
The default value is: YES
.
SEPARATE_MEMBER_PAGES
If the SEPARATE_MEMBER_PAGES
tag is set to YES
then doxygen will produce a new page for each member. If set to NO
, the documentation of a member will be part of the file/class/namespace that contains it.
The default value is: NO
.
TAB_SIZE
The TAB_SIZE
tag can be used to set the number of spaces in a tab. Doxygen uses this value to replace tabs by spaces in code fragments.
Minimum value: 1
, maximum value: 16
, default value: 4
.
ALIASES
This tag can be used to specify a number of aliases that act as commands in the documentation. An alias has the form:
name=value
For example adding
"sideeffect=@par Side Effects:\n"
will allow you to put the command \sideeffect
(or @sideeffect
) in the documentation, which will result in a user-defined paragraph with heading "Side Effects:". You can put \n's in the value part of an alias to insert newlines (in the resulting output). You can put ^^
in the value part of an alias to insert a newline as if a physical newline was in the original file. When you need a literal {
or }
or ,
in the value part of an alias you have to escape them by means of a backslash (\
), this can lead to conflicts with the commands \{
and \}
for these it is advised to use the version @{
and @}
or use a double escape (\\{
and \\}
)
TCL_SUBST
This tag can be used to specify a number of word-keyword mappings (TCL only). A mapping has the form "name=value"
. For example adding "class=itcl::class"
will allow you to use the command class in the itcl::class
meaning.
OPTIMIZE_OUTPUT_FOR_C
Set the OPTIMIZE_OUTPUT_FOR_C
tag to YES
if your project consists of C sources only. Doxygen will then generate output that is more tailored for C. For instance, some of the names that are used will be different. The list of all members will be omitted, etc.
The default value is: NO
.
OPTIMIZE_OUTPUT_JAVA
Set the OPTIMIZE_OUTPUT_JAVA
tag to YES
if your project consists of Java or Python sources only. Doxygen will then generate output that is more tailored for that language. For instance, namespaces will be presented as packages, qualified scopes will look different, etc.
The default value is: NO
.
OPTIMIZE_FOR_FORTRAN
Set the OPTIMIZE_FOR_FORTRAN
tag to YES
if your project consists of Fortran sources. Doxygen will then generate output that is tailored for Fortran.
The default value is: NO
.
OPTIMIZE_OUTPUT_VHDL
Set the OPTIMIZE_OUTPUT_VHDL
tag to YES
if your project consists of VHDL sources. Doxygen will then generate output that is tailored for VHDL.
The default value is: NO
.
OPTIMIZE_OUTPUT_SLICE
Set the OPTIMIZE_OUTPUT_SLICE
tag to YES
if your project consists of Slice sources only. Doxygen will then generate output that is more tailored for that language. For instance, namespaces will be presented as modules, types will be separated into more groups, etc.
The default value is: NO
.
EXTENSION_MAPPING
Doxygen selects the parser to use depending on the extension of the files it parses. With this tag you can assign which parser to use for a given extension. Doxygen has a built-in mapping, but you can override or extend it using this tag. The format is ext=language
, where ext
is a file extension, and language is one of the parsers supported by doxygen: IDL, Java, JavaScript, Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: Fortran. In the later case the parser tries to guess whether the code is fixed or free formatted code, this is the default for Fortran type files), VHDL, tcl.
For instance to make doxygen treat .inc
files as Fortran files (default is PHP), and .f
files as C (default is Fortran), use: inc=Fortran f=C
.
Note: For files without extension you can use no_extension
as a placeholder.
Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
MARKDOWN_SUPPORT
If the MARKDOWN_SUPPORT
tag is enabled then doxygen pre-processes all comments according to the Markdown format, which allows for more readable documentation. See https://daringfireball.net/projects/markdown/ for details. The output of markdown processing is further processed by doxygen, so you can mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in case of backward compatibilities issues.
The default value is: YES
.
TOC_INCLUDE_HEADINGS
When the TOC_INCLUDE_HEADINGS
tag is set to a non-zero value, all headings up to that level are automatically included in the table of contents, even if they do not have an id attribute.
Minimum value: 0
, maximum value: 99
, default value: 5
.
This tag requires that the tag MARKDOWN_SUPPORT is set to YES
.
AUTOLINK_SUPPORT
When enabled doxygen tries to link words that correspond to documented classes, or namespaces to their corresponding documentation. Such a link can be prevented in individual cases by putting a %
sign in front of the word or globally by setting AUTOLINK_SUPPORT
to NO
.
The default value is: YES
.
BUILTIN_STL_SUPPORT
If you use STL classes (i.e. std::string
, std::vector
, etc.) but do not want to include (a tag file for) the STL sources as input, then you should set this tag to YES
in order to let doxygen match functions declarations and definitions whose arguments contain STL classes (e.g. func(std::string
); versus func(std::string) {}
). This also make the inheritance and collaboration diagrams that involve STL classes more complete and accurate.
The default value is: NO
.
CPP_CLI_SUPPORT
If you use Microsoft's C++/CLI language, you should set this option to YES
to enable parsing support.
The default value is: NO
.
SIP_SUPPORT
Set the SIP_SUPPORT
tag to YES
if your project consists of sip sources only. Doxygen will parse them like normal C++ but will assume all classes use public instead of private inheritance when no explicit protection keyword is present.
The default value is: NO
.
IDL_PROPERTY_SUPPORT
For Microsoft's IDL there are propget
and propput
attributes to indicate getter and setter methods for a property. Setting this option to YES
will make doxygen to replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO
.
The default value is: YES
.
DISTRIBUTE_GROUP_DOC
If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
tag is set to YES
then doxygen will reuse the documentation of the first member in the group (if any) for the other members of the group. By default all members of a group must be documented explicitly.
The default value is: NO
.
GROUP_NESTED_COMPOUNDS
If one adds a struct or class to a group and this option is enabled, then also any nested class or struct is added to the same group. By default this option is disabled and one has to add nested compounds explicitly via \ingroup.
The default value is: NO
.
SUBGROUPING
Set the SUBGROUPING
tag to YES
to allow class member groups of the same type (for instance a group of public functions) to be put as a subgroup of that type (e.g. under the Public Functions section). Set it to NO
to prevent subgrouping. Alternatively, this can be done per class using the \nosubgrouping command.
The default value is: YES
.
INLINE_GROUPED_CLASSES
When the INLINE_GROUPED_CLASSES
tag is set to YES
, classes, structs and unions are shown inside the group in which they are included (e.g. using \ingroup) instead of on a separate page (for HTML and Man pages) or section (for and RTF).
Note that this feature does not work in combination with SEPARATE_MEMBER_PAGES.
The default value is: NO
.
INLINE_SIMPLE_STRUCTS
When the INLINE_SIMPLE_STRUCTS
tag is set to YES
, structs, classes, and unions with only public data fields or simple typedef fields will be shown inline in the documentation of the scope in which they are defined (i.e. file, namespace, or group documentation), provided this scope is documented. If set to NO
, structs, classes, and unions are shown on a separate page (for HTML and Man pages) or section (for and RTF).
The default value is: NO
.
TYPEDEF_HIDES_STRUCT
When TYPEDEF_HIDES_STRUCT
tag is enabled, a typedef of a struct, union, or enum is documented as struct, union, or enum with the name of the typedef. So typedef struct TypeS {} TypeT
, will appear in the documentation as a struct with name TypeT
. When disabled the typedef will appear as a member of a file, namespace, or class. And the struct will be named TypeS
. This can typically be useful for C code in case the coding convention dictates that all compound types are typedef'ed and only the typedef is referenced, never the tag name.
The default value is: NO
.
LOOKUP_CACHE_SIZE
The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE
. This cache is used to resolve symbols given their name and scope. Since this can be an expensive process and often the same symbol appears multiple times in the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small doxygen will become slower. If the cache is too large, memory is wasted. The cache size is given by this formula: . The valid range is 0..9, the default is 0, corresponding to a cache size of symbols. At the end of a run doxygen will report the cache usage and suggest the optimal cache size from a speed point of view.
Minimum value: 0
, maximum value: 9
, default value: 0
.
EXTRACT_ALL
If the EXTRACT_ALL
tag is set to YES
, doxygen will assume all entities in documentation are documented, even if no documentation was available. Private class members and static file members will be hidden unless the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES
.
YES
.The default value is: NO
.
EXTRACT_PRIVATE
If the EXTRACT_PRIVATE
tag is set to YES
, all private members of a class will be included in the documentation.
The default value is: NO
.
EXTRACT_PRIV_VIRTUAL
If the EXTRACT_PRIV_VIRTUAL
tag is set to YES
, documented private virtual methods of a class will be included in the documentation.
The default value is: NO
.
EXTRACT_PACKAGE
If the EXTRACT_PACKAGE
tag is set to YES
, all members with package or internal scope will be included in the documentation.
The default value is: NO
.
EXTRACT_STATIC
If the EXTRACT_STATIC
tag is set to YES
, all static members of a file will be included in the documentation.
The default value is: NO
.
EXTRACT_LOCAL_CLASSES
If the EXTRACT_LOCAL_CLASSES
tag is set to YES
, classes (and structs) defined locally in source files will be included in the documentation. If set to NO
, only classes defined in header files are included. Does not have any effect for Java sources.
The default value is: YES
.
EXTRACT_LOCAL_METHODS
This flag is only useful for Objective-C code. If set to YES
, local methods, which are defined in the implementation section but not in the interface are included in the documentation. If set to NO
, only methods in the interface are included.
The default value is: NO
.
EXTRACT_ANON_NSPACES
If this flag is set to YES
, the members of anonymous namespaces will be extracted and appear in the documentation as a namespace called 'anonymous_namespace{file}', where file will be replaced with the base name of the file that contains the anonymous namespace. By default anonymous namespace are hidden.
The default value is: NO
.
HIDE_UNDOC_MEMBERS
If the HIDE_UNDOC_MEMBERS
tag is set to YES
, doxygen will hide all undocumented members inside documented classes or files. If set to NO
these members will be included in the various overviews, but no documentation section is generated. This option has no effect if EXTRACT_ALL is enabled.
The default value is: NO
.
HIDE_UNDOC_CLASSES
If the HIDE_UNDOC_CLASSES
tag is set to YES
, doxygen will hide all undocumented classes that are normally visible in the class hierarchy. If set to NO
, these classes will be included in the various overviews. This option has no effect if EXTRACT_ALL is enabled.
The default value is: NO
.
HIDE_FRIEND_COMPOUNDS
If the HIDE_FRIEND_COMPOUNDS
tag is set to YES
, doxygen will hide all friend declarations. If set to NO
, these declarations will be included in the documentation.
The default value is: NO
.
HIDE_IN_BODY_DOCS
If the HIDE_IN_BODY_DOCS
tag is set to YES
, doxygen will hide any documentation blocks found inside the body of a function. If set to NO
, these blocks will be appended to the function's detailed documentation block.
The default value is: NO
.
INTERNAL_DOCS
The INTERNAL_DOCS
tag determines if documentation that is typed after a \internal command is included. If the tag is set to NO
then the documentation will be excluded. Set it to YES
to include the internal documentation.
The default value is: NO
.
CASE_SENSE_NAMES
If the CASE_SENSE_NAMES
tag is set to NO
then doxygen will only generate file names in lower-case letters. If set to YES
, upper-case letters are also allowed. This is useful if you have classes or files whose names only differ in case and if your file system supports case sensitive file names. Windows (including Cygwin) ands Mac users are advised to set this option to NO
.
The default value is: system dependent.
HIDE_SCOPE_NAMES
If the HIDE_SCOPE_NAMES
tag is set to NO
then doxygen will show members with their full class and namespace scopes in the documentation. If set to YES
, the scope will be hidden.
The default value is: NO
.
HIDE_COMPOUND_REFERENCE
If the HIDE_COMPOUND_REFERENCE
tag is set to NO
(default) then doxygen will append additional text to a page's title, such as Class Reference. If set to YES
the compound reference will be hidden.
The default value is: NO
.
SHOW_INCLUDE_FILES
If the SHOW_INCLUDE_FILES
tag is set to YES
then doxygen will put a list of the files that are included by a file in the documentation of that file.
The default value is: YES
.
SHOW_GROUPED_MEMB_INC
If the SHOW_GROUPED_MEMB_INC tag is set to YES
then Doxygen will add for each grouped member an include statement to the documentation, telling the reader which file to include in order to use the member.
The default value is: NO
.
FORCE_LOCAL_INCLUDES
If the FORCE_LOCAL_INCLUDES
tag is set to YES
then doxygen will list include files with double quotes in the documentation rather than with sharp brackets.
The default value is: NO
.
INLINE_INFO
If the INLINE_INFO
tag is set to YES
then a tag [inline] is inserted in the documentation for inline members.
The default value is: YES
.
SORT_MEMBER_DOCS
If the SORT_MEMBER_DOCS
tag is set to YES
then doxygen will sort the (detailed) documentation of file and class members alphabetically by member name. If set to NO
, the members will appear in declaration order.
The default value is: YES
.
SORT_BRIEF_DOCS
If the SORT_BRIEF_DOCS
tag is set to YES
then doxygen will sort the brief descriptions of file, namespace and class members alphabetically by member name. If set to NO
, the members will appear in declaration order. Note that this will also influence the order of the classes in the class list.
The default value is: NO
.
SORT_MEMBERS_CTORS_1ST
If the SORT_MEMBERS_CTORS_1ST
tag is set to YES
then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO
the constructors will appear in the respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
NO
this option is ignored for sorting brief member documentation. NO
this option is ignored for sorting detailed member documentation.The default value is: NO
.
SORT_GROUP_NAMES
If the SORT_GROUP_NAMES
tag is set to YES
then doxygen will sort the hierarchy of group names into alphabetical order. If set to NO
the group names will appear in their defined order.
The default value is: NO
.
SORT_BY_SCOPE_NAME
If the SORT_BY_SCOPE_NAME
tag is set to YES
, the class list will be sorted by fully-qualified names, including namespaces. If set to NO
, the class list will be sorted only by class name, not including the namespace part.
YES
. The default value is: NO
.
STRICT_PROTO_MATCHING
If the STRICT_PROTO_MATCHING
option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING
doxygen will still accept a match between prototype and implementation in such cases.
The default value is: NO
.
GENERATE_TODOLIST
The GENERATE_TODOLIST
tag can be used to enable (YES
) or disable (NO
) the todo list. This list is created by putting \todo commands in the documentation.
The default value is: YES
.
GENERATE_TESTLIST
The GENERATE_TESTLIST
tag can be used to enable (YES
) or disable (NO
) the test list. This list is created by putting \test commands in the documentation.
The default value is: YES
.
GENERATE_BUGLIST
The GENERATE_BUGLIST
tag can be used to enable (YES
) or disable (NO
) the bug list. This list is created by putting \bug commands in the documentation.
The default value is: YES
.
GENERATE_DEPRECATEDLIST
The GENERATE_DEPRECATEDLIST
tag can be used to enable (YES
) or disable (NO
) the deprecated list. This list is created by putting \deprecated commands in the documentation.
The default value is: YES
.
ENABLED_SECTIONS
The ENABLED_SECTIONS
tag can be used to enable conditional documentation sections, marked by \if <section_label> ... \endif and \cond <section_label> ... \endcond blocks.
MAX_INITIALIZER_LINES
The MAX_INITIALIZER_LINES
tag determines the maximum number of lines that the initial value of a variable or macro / define can have for it to appear in the documentation. If the initializer consists of more lines than specified here it will be hidden. Use a value of 0 to hide initializers completely. The appearance of the value of individual variables and macros / defines can be controlled using \showinitializer or \hideinitializer command in the documentation regardless of this setting.
Minimum value: 0
, maximum value: 10000
, default value: 30
.
SHOW_USED_FILES
Set the SHOW_USED_FILES
tag to NO
to disable the list of files generated at the bottom of the documentation of classes and structs. If set to YES
, the list will mention the files that were used to generate the documentation.
The default value is: YES
.
SHOW_FILES
Set the SHOW_FILES
tag to NO
to disable the generation of the Files page. This will remove the Files entry from the Quick Index and from the Folder Tree View (if specified).
The default value is: YES
.
SHOW_NAMESPACES
Set the SHOW_NAMESPACES
tag to NO
to disable the generation of the Namespaces page. This will remove the Namespaces entry from the Quick Index and from the Folder Tree View (if specified).
The default value is: YES
.
FILE_VERSION_FILTER
The FILE_VERSION_FILTER
tag can be used to specify a program or script that doxygen should invoke to get the current version for each file (typically from the version control system). Doxygen will invoke the program by executing (via popen()
) the command command input-file
, where command
is the value of the FILE_VERSION_FILTER
tag, and input-file
is the name of an input file provided by doxygen. Whatever the program writes to standard output is used as the file version.
Example of using a shell script as a filter for Unix:
FILE_VERSION_FILTER = "/bin/sh versionfilter.sh"
Example shell script for CVS:
#!/bin/sh cvs status $1 | sed -n 's/^[ \]*Working revision:[ \t]*\([0-9][0-9\.]*\).*/\1/p'
Example shell script for Subversion:
#!/bin/sh svn stat -v $1 | sed -n 's/^[ A-Z?\*|!]\{1,15\}/r/;s/ \{1,15\}/\/r/;s/ .*//p'
Example filter for ClearCase:
FILE_VERSION_FILTER = "cleartool desc -fmt \%Vn"
LAYOUT_FILE
The LAYOUT_FILE
tag can be used to specify a layout file which will be parsed by doxygen. The layout file controls the global structure of the generated output files in an output format independent way. To create the layout file that represents doxygen's defaults, run doxygen with the -l
option. You can optionally specify a file name after the option, if omitted DoxygenLayout.xml
will be used as the name of the layout file.
Note that if you run doxygen from a directory containing a file called DoxygenLayout.xml
, doxygen will parse it automatically even if the LAYOUT_FILE
tag is left empty.
CITE_BIB_FILES
The CITE_BIB_FILES
tag can be used to specify one or more bib
files containing the reference definitions. This must be a list of .bib
files. The .bib
extension is automatically appended if omitted. This requires the bibtex
tool to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. For the style of the bibliography can be controlled using LATEX_BIB_STYLE. To use this feature you need bibtex
and perl
available in the search path. See also \cite for info how to create references.
QUIET
The QUIET
tag can be used to turn on/off the messages that are generated to standard output by doxygen. If QUIET
is set to YES
this implies that the messages are off.
The default value is: NO
.
WARNINGS
The WARNINGS
tag can be used to turn on/off the warning messages that are generated to standard error (stderr
) by doxygen. If WARNINGS
is set to YES
this implies that the warnings are on.
Tip: Turn warnings on while writing the documentation.
The default value is: YES
.
WARN_IF_UNDOCUMENTED
If the WARN_IF_UNDOCUMENTED
tag is set to YES
then doxygen will generate warnings for undocumented members. If EXTRACT_ALL is set to YES
then this flag will automatically be disabled.
The default value is: YES
.
WARN_IF_DOC_ERROR
If the WARN_IF_DOC_ERROR
tag is set to YES
, doxygen will generate warnings for potential errors in the documentation, such as not documenting some parameters in a documented function, or documenting parameters that don't exist or using markup commands wrongly.
The default value is: YES
.
WARN_NO_PARAMDOC
This WARN_NO_PARAMDOC
option can be enabled to get warnings for functions that are documented, but have no documentation for their parameters or return value. If set to NO
, doxygen will only warn about wrong or incomplete parameter documentation, but not about the absence of documentation. If EXTRACT_ALL is set to YES
then this flag will automatically be disabled.
The default value is: NO
.
WARN_AS_ERROR
If the WARN_AS_ERROR
tag is set to YES
then doxygen will immediately stop when a warning is encountered.
The default value is: NO
.
WARN_FORMAT
The WARN_FORMAT
tag determines the format of the warning messages that doxygen can produce. The string should contain the $file
, $line
, and $text
tags, which will be replaced by the file and line number from which the warning originated and the warning text. Optionally the format may contain $version
, which will be replaced by the version of the file (if it could be obtained via FILE_VERSION_FILTER)
The default value is: $file:$line: $text
.
WARN_LOGFILE
The WARN_LOGFILE
tag can be used to specify a file to which warning and error messages should be written. If left blank the output is written to standard error (stderr
).
INPUT
The INPUT
tag is used to specify the files and/or directories that contain documented source files. You may enter file names like myfile.cpp
or directories like /usr/src/myproject
. Separate the files or directories with spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
INPUT_ENCODING
This tag can be used to specify the character encoding of the source files that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses libiconv
(or the iconv
built into libc
) for the transcoding. See the libiconv documentation for the list of possible encodings.
The default value is: UTF-8
.
FILE_PATTERNS
If the value of the INPUT tag contains directories, you can use the FILE_PATTERNS
tag to specify one or more wildcard patterns (like *.cpp
and *.h
) to filter out the source-files in the directories.
Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not read by doxygen.
If left blank the following patterns are tested: *.c
, *.cc
, *.cxx
, *.cpp
, *.c++
, *.java
, *.ii
, *.ixx
, *.ipp
, *.i++
, *.inl
, *.idl
, *.ddl
, *.odl
, *.h
, *.hh
, *.hxx
, *.hpp
, *.h++
, *.cs
, *.d
, *.php
, *.php4
, *.php5
, *.phtml
, *.inc
, *.m
, *.markdown
, *.md
, *.mm
, *.dox
(to be provided as doxygen C comment), *.doc
(to be provided as doxygen C comment), *.txt
(to be provided as doxygen C comment), *.py
, *.pyw
, *.f90
, *.f95
, *.f03
, *.f08
, *.f
, *.for
, *.tcl
, *.vhd
, *.vhdl
, *.ucf
, *.qsf
and *.ice
.
RECURSIVE
The RECURSIVE
tag can be used to specify whether or not subdirectories should be searched for input files as well.
The default value is: NO
.
EXCLUDE
The EXCLUDE
tag can be used to specify files and/or directories that should be excluded from the INPUT source files. This way you can easily exclude a subdirectory from a directory tree whose root is specified with the INPUT tag.
Note that relative paths are relative to the directory from which doxygen is run.
EXCLUDE_SYMLINKS
The EXCLUDE_SYMLINKS
tag can be used to select whether or not files or directories that are symbolic links (a Unix file system feature) are excluded from the input.
The default value is: NO
.
EXCLUDE_PATTERNS
If the value of the INPUT tag contains directories, you can use the EXCLUDE_PATTERNS
tag to specify one or more wildcard patterns to exclude certain files from those directories.
Note that the wildcards are matched against the file with absolute path, so to exclude all test directories for example use the pattern *
/test/
*
EXCLUDE_SYMBOLS
The EXCLUDE_SYMBOLS
tag can be used to specify one or more symbol names (namespaces, classes, functions, etc.) that should be excluded from the output. The symbol name can be a fully qualified name, a word, or if the wildcard *
is used, a substring. Examples: ANamespace
, AClass
, AClass::ANamespace
, ANamespace::*Test
Note that the wildcards are matched against the file with absolute path, so to exclude all test directories use the pattern *
/test/
*
EXAMPLE_PATH
The EXAMPLE_PATH
tag can be used to specify one or more files or directories that contain example code fragments that are included (see the \include command).
EXAMPLE_PATTERNS
If the value of the EXAMPLE_PATH tag contains directories, you can use the EXAMPLE_PATTERNS
tag to specify one or more wildcard pattern (like *.cpp
and *.h
) to filter out the source-files in the directories. If left blank all files are included.
EXAMPLE_RECURSIVE
If the EXAMPLE_RECURSIVE
tag is set to YES
then subdirectories will be searched for input files to be used with the \include or \dontinclude commands irrespective of the value of the RECURSIVE tag.
The default value is: NO
.
IMAGE_PATH
The IMAGE_PATH
tag can be used to specify one or more files or directories that contain images that are to be included in the documentation (see the \image command).
INPUT_FILTER
The INPUT_FILTER
tag can be used to specify a program that doxygen should invoke to filter for each input file. Doxygen will invoke the filter program by executing (via popen()
) the command:
<filter> <input-file>
where <filter>
is the value of the INPUT_FILTER
tag, and <input-file>
is the name of an input file. Doxygen will then use the output that the filter program writes to standard output. If FILTER_PATTERNS is specified, this tag will be ignored.
Note that the filter must not add or remove lines; it is applied before the code is scanned, but not when the output code is generated. If lines are added or removed, the anchors will not be placed correctly.
Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not properly processed by doxygen.
FILTER_PATTERNS
The FILTER_PATTERNS
tag can be used to specify filters on a per file pattern basis. Doxygen will compare the file name with each pattern and apply the filter if there is a match. The filters are a list of the form: pattern=filter (like *.cpp=my_cpp_filter
). See INPUT_FILTER for further information on how filters are used. If the FILTER_PATTERNS
tag is empty or if none of the patterns match the file name, INPUT_FILTER is applied.
Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not properly processed by doxygen.
FILTER_SOURCE_FILES
If the FILTER_SOURCE_FILES
tag is set to YES
, the input filter (if set using INPUT_FILTER) will also be used to filter the input files that are used for producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES
).
The default value is: NO
.
FILTER_SOURCE_PATTERNS
The FILTER_SOURCE_PATTERNS
tag can be used to specify source filters per file pattern. A pattern will override the setting for FILTER_PATTERN (if any) and it is also possible to disable source filtering for a specific pattern using *.ext=
(so without naming a filter).
This tag requires that the tag FILTER_SOURCE_FILES is set to YES
.
USE_MDFILE_AS_MAINPAGE
If the USE_MDFILE_AS_MAINPAGE
tag refers to the name of a markdown file that is part of the input, its contents will be placed on the main page (index.html
). This can be useful if you have a project on for instance GitHub and want to reuse the introduction page also for the doxygen output.
SOURCE_BROWSER
If the SOURCE_BROWSER
tag is set to YES
then a list of source files will be generated. Documented entities will be cross-referenced with these sources.
Note: To get rid of all source code in the generated output, make sure that also VERBATIM_HEADERS is set to NO
.
The default value is: NO
.
INLINE_SOURCES
Setting the INLINE_SOURCES
tag to YES
will include the body of functions, classes and enums directly into the documentation.
The default value is: NO
.
STRIP_CODE_COMMENTS
Setting the STRIP_CODE_COMMENTS
tag to YES
will instruct doxygen to hide any special comment blocks from generated source code fragments. Normal C, C++ and Fortran comments will always remain visible.
The default value is: YES
.
REFERENCED_BY_RELATION
If the REFERENCED_BY_RELATION
tag is set to YES
then for each documented entity all documented functions referencing it will be listed.
The default value is: NO
.
REFERENCES_RELATION
If the REFERENCES_RELATION
tag is set to YES
then for each documented function all documented entities called/used by that function will be listed.
The default value is: NO
.
REFERENCES_LINK_SOURCE
If the REFERENCES_LINK_SOURCE
tag is set to YES
and SOURCE_BROWSER tag is set to YES
then the hyperlinks from functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will link to the documentation.
The default value is: YES
.
SOURCE_TOOLTIPS
If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the source code will show a tooltip with additional information such as prototype, brief description and links to the definition and documentation. Since this will make the HTML file larger and loading of large files a bit slower, you can opt to disable this feature.
The default value is: YES
.
This tag requires that the tag SOURCE_BROWSER is set to YES
.
USE_HTAGS
If the USE_HTAGS
tag is set to YES
then the references to source code will point to the HTML generated by the htags(1)
tool instead of doxygen built-in source browser. The htags
tool is part of GNU's global source tagging system (see https://www.gnu.org/software/global/global.html). You will need version 4.8.6 or higher.
To use it do the following:
global
USE_HTAGS
in the configuration filedoxygen
as normal htags
(and that will in turn invoke gtags
), so these tools must be available from the command line (i.e. in the search path). htags
.The default value is: NO
.
This tag requires that the tag SOURCE_BROWSER is set to YES
.
VERBATIM_HEADERS
If the VERBATIM_HEADERS
tag is set the YES
then doxygen will generate a verbatim copy of the header file for each class for which an include is specified. Set to NO
to disable this.
The default value is: YES
.
CLANG_ASSISTED_PARSING
If the CLANG_ASSISTED_PARSING
tag is set to YES
then doxygen will use the clang parser for more accurate parsing at the cost of reduced performance. This can be particularly helpful with template rich C++ code for which doxygen's built-in parser lacks the necessary type information.
-Duse_libclang=ON
option for CMake.The default value is: NO
.
CLANG_OPTIONS
If clang assisted parsing is enabled you can provide the compiler with command line options that you would normally use when invoking the compiler. Note that the include paths will already be set by doxygen for the files and directories specified with INPUT and INCLUDE_PATH.
This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES
.
CLANG_DATABASE_PATH
If clang assisted parsing is enabled you can provide the clang parser with the path to the compilation database used when the files were built. This is equivalent to specifying the "-p" option to a clang tool, such as clang-check. These options will then be passed to the parser.
-Duse_libclang=ON
option for CMake.ALPHABETICAL_INDEX
If the ALPHABETICAL_INDEX
tag is set to YES
, an alphabetical index of all compounds will be generated. Enable this if the project contains a lot of classes, structs, unions or interfaces.
The default value is: YES
.
COLS_IN_ALPHA_INDEX
The COLS_IN_ALPHA_INDEX
tag can be used to specify the number of columns in which the alphabetical index list will be split.
Minimum value: 1
, maximum value: 20
, default value: 5
.
This tag requires that the tag ALPHABETICAL_INDEX is set to YES
.
IGNORE_PREFIX
In case all classes in a project start with a common prefix, all classes will be put under the same header in the alphabetical index. The IGNORE_PREFIX
tag can be used to specify a prefix (or a list of prefixes) that should be ignored while generating the index headers.
This tag requires that the tag ALPHABETICAL_INDEX is set to YES
.
GENERATE_HTML
If the GENERATE_HTML
tag is set to YES
, doxygen will generate HTML output
The default value is: YES
.
HTML_OUTPUT
The HTML_OUTPUT
tag is used to specify where the HTML docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.
The default directory is: html
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_FILE_EXTENSION
The HTML_FILE_EXTENSION
tag can be used to specify the file extension for each generated HTML page (for example: .htm, .php, .asp
).
The default value is: .html
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_HEADER
The HTML_HEADER
tag can be used to specify a user-defined HTML header file for each generated HTML page. If the tag is left blank doxygen will generate a standard header.
To get valid HTML the header file that includes any scripts and style sheets that doxygen needs, which is dependent on the configuration options used (e.g. the setting GENERATE_TREEVIEW). It is highly recommended to start with a default header using
doxygen -w html new_header.html new_footer.html new_stylesheet.css YourConfigFile
and then modify the file new_header.html
.
See also section Doxygen usage for information on how to generate the default header that doxygen normally uses.
$title
$datetime
$date
$year
$doxygenversion
$projectname
$projectnumber
$projectbrief
$projectlogo
$treeview
$search
$mathjax
$relpath^
$relpath^
can be used to produce a relative path to the root of the HTML output directory, e.g. use $relpath^doxygen.css
, to refer to the standard style sheet. To cope with differences in the layout of the header and footer that depend on configuration settings, the header can also contain special blocks that will be copied to the output or skipped depending on the configuration. Such blocks have the following form:
<!--BEGIN BLOCKNAME--> Some context copied when condition BLOCKNAME holds <!--END BLOCKNAME--> <!--BEGIN !BLOCKNAME--> Some context copied when condition BLOCKNAME does not hold <!--END !BLOCKNAME-->
The following block names are supported:
DISABLE_INDEX
GENERATE_TREEVIEW
SEARCHENGINE
PROJECT_NAME
PROJECT_NUMBER
PROJECT_BRIEF
PROJECT_LOGO
TITLEAREA
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_FOOTER
The HTML_FOOTER
tag can be used to specify a user-defined HTML footer for each generated HTML page. If the tag is left blank doxygen will generate a standard footer.
See HTML_HEADER for more information on how to generate a default footer and what special commands can be used inside the footer.
See also section Doxygen usage for information on how to generate the default footer that doxygen normally uses.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_STYLESHEET
The HTML_STYLESHEET
tag can be used to specify a user-defined cascading style sheet that is used by each HTML page. It can be used to fine-tune the look of the HTML output. If left blank doxygen will generate a default style sheet.
See also section Doxygen usage for information on how to generate the style sheet that doxygen normally uses.
HTML_STYLESHEET
) will in the future become obsolete.This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_EXTRA_STYLESHEET
HTML_EXTRA_STYLESHEET
tag can be used to specify additional user-defined cascading style sheets that are included after the standard style sheets created by doxygen. Using this option one can overrule certain style aspects. This is preferred over using HTML_STYLESHEET since it does not replace the standard style sheet and is therefore more robust against future updates. Doxygen will copy the style sheet files to the output directory. body { background-color: #CCC; color: black; margin: 0; } div.contents { margin-bottom: 10px; padding: 12px; margin-left: auto; margin-right: auto; width: 960px; background-color: white; border-radius: 8px; } #titlearea { background-color: white; } hr.footer { display: none; } .footer { background-color: #AAA; }
YES
. HTML_EXTRA_FILES
The HTML_EXTRA_FILES
tag can be used to specify one or more extra images or other source files which should be copied to the HTML output directory. Note that these files will be copied to the base HTML output directory. Use the $relpath^
marker in the HTML_HEADER and/or HTML_FOOTER files to load these files. In the HTML_STYLESHEET file, use the file name only. Also note that the files will be copied as-is; there are no commands or markers available.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_COLORSTYLE_HUE
The HTML_COLORSTYLE_HUE
tag controls the color of the HTML output. Doxygen will adjust the colors in the style sheet and background images according to this color. Hue is specified as an angle on a colorwheel, see https://en.wikipedia.org/wiki/Hue for more information. For instance the value 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
Minimum value: 0
, maximum value: 359
, default value: 220
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_COLORSTYLE_SAT
The HTML_COLORSTYLE_SAT
tag controls the purity (or saturation) of the colors in the HTML output. For a value of 0 the output will use grayscales only. A value of 255 will produce the most vivid colors.
Minimum value: 0
, maximum value: 255
, default value: 100
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_COLORSTYLE_GAMMA
The HTML_COLORSTYLE_GAMMA
tag controls the gamma correction applied to the luminance component of the colors in the HTML output. Values below 100 gradually make the output lighter, whereas values above 100 make the output darker. The value divided by 100 is the actual gamma applied, so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not change the gamma.
Minimum value: 40
, maximum value: 240
, default value: 80
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_TIMESTAMP
If the HTML_TIMESTAMP
tag is set to YES
then the footer of each generated HTML page will contain the date and time when the page was generated. Setting this to YES
can help to show when doxygen was last run and thus if the documentation is up to date.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_DYNAMIC_MENUS
If the HTML_DYNAMIC_MENUS
tag is set to YES
then the generated HTML documentation will contain a main index with vertical navigation menus that are dynamically created via JavaScript. If disabled, the navigation index will consists of multiple levels of tabs that are statically embedded in every HTML page. Disable this option to support browsers that do not have JavaScript, like the Qt help browser.
The default value is: YES
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_DYNAMIC_SECTIONS
If the HTML_DYNAMIC_SECTIONS
tag is set to YES
then the generated HTML documentation will contain sections that can be hidden and shown after the page has loaded.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
HTML_INDEX_NUM_ENTRIES
With HTML_INDEX_NUM_ENTRIES
one can control the preferred number of entries shown in the various tree structured indices initially; the user can expand and collapse entries dynamically later on. Doxygen will expand the tree to such a level that at most the specified number of entries are visible (unless a fully collapsed tree already exceeds this amount). So setting the number of entries 1 will produce a full collapsed tree by default. 0 is a special value representing an infinite number of entries and will result in a full expanded tree by default.
Minimum value: 0
, maximum value: 9999
, default value: 100
.
This tag requires that the tag GENERATE_HTML is set to YES
.
GENERATE_DOCSET
If the GENERATE_DOCSET
tag is set to YES
, additional index files will be generated that can be used as input for Apple's Xcode 3 integrated development environment, introduced with OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a Makefile in the HTML output directory. Running make
will produce the docset in that directory and running make install
will install the docset in ~/Library/Developer/Shared/Documentation/DocSets
so that Xcode will find it at startup. See https://developer.apple.com/library/archive/featuredarticles/DoxygenXcode/_index.html for more information.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
DOCSET_FEEDNAME
This tag determines the name of the docset feed. A documentation feed provides an umbrella under which multiple documentation sets from a single provider (such as a company or product suite) can be grouped.
The default value is: Doxygen generated docs
.
This tag requires that the tag GENERATE_DOCSET is set to YES
.
DOCSET_BUNDLE_ID
This tag specifies a string that should uniquely identify the documentation set bundle. This should be a reverse domain-name style string, e.g. com.mycompany.MyDocSet
. Doxygen will append .docset
to the name.
The default value is: org.doxygen.Project
.
This tag requires that the tag GENERATE_DOCSET is set to YES
.
DOCSET_PUBLISHER_ID
The DOCSET_PUBLISHER_ID
tag specifies a string that should uniquely identify the documentation publisher. This should be a reverse domain-name style string, e.g. com.mycompany.MyDocSet.documentation
.
The default value is: org.doxygen.Publisher
.
This tag requires that the tag GENERATE_DOCSET is set to YES
.
DOCSET_PUBLISHER_NAME
The DOCSET_PUBLISHER_NAME
tag identifies the documentation publisher.
The default value is: Publisher
.
This tag requires that the tag GENERATE_DOCSET is set to YES
.
GENERATE_HTMLHELP
If the GENERATE_HTMLHELP
tag is set to YES
then doxygen generates three additional HTML index files: index.hhp
, index.hhc
, and index.hhk
. The index.hhp
is a project file that can be read by Microsoft's HTML Help Workshop on Windows.
The HTML Help Workshop contains a compiler that can convert all HTML output generated by doxygen into a single compiled HTML file (.chm
). Compiled HTML files are now used as the Windows 98 help format, and will replace the old Windows help format (.hlp
) on all Windows platforms in the future. Compressed HTML files also contain an index, a table of contents, and you can search for words in the documentation. The HTML workshop also contains a viewer for compressed HTML files.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
CHM_FILE
The CHM_FILE
tag can be used to specify the file name of the resulting .chm
file. You can add a path in front of the file if the result should not be written to the html output directory.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
HHC_LOCATION
The HHC_LOCATION
tag can be used to specify the location (absolute path including file name) of the HTML help compiler (hhc.exe
). If non-empty, doxygen will try to run the HTML help compiler on the generated index.hhp
.
The file has to be specified with full path.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
GENERATE_CHI
The GENERATE_CHI
flag controls if a separate .chi
index file is generated (YES
) or that it should be included in the master .chm
file (NO
).
The default value is: NO
.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
CHM_INDEX_ENCODING
The CHM_INDEX_ENCODING
is used to encode HtmlHelp index (hhk
), content (hhc
) and project file content.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
BINARY_TOC
The BINARY_TOC
flag controls whether a binary table of contents is generated (YES
) or a normal table of contents (NO
) in the .chm
file. Furthermore it enables the Previous
and Next
buttons.
The default value is: NO
.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
TOC_EXPAND
The TOC_EXPAND
flag can be set to YES
to add extra items for group members to the table of contents of the HTML help documentation and to the tree view.
The default value is: NO
.
This tag requires that the tag GENERATE_HTMLHELP is set to YES
.
GENERATE_QHP
If the GENERATE_QHP
tag is set to YES
and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help (.qch
) of the generated HTML documentation.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
QCH_FILE
If the QHG_LOCATION tag is specified, the QCH_FILE
tag can be used to specify the file name of the resulting .qch
file. The path specified is relative to the HTML output folder.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHP_NAMESPACE
The QHP_NAMESPACE
tag specifies the namespace to use when generating Qt Help Project output. For more information please see Qt Help Project / Namespace.
The default value is: org.doxygen.Project
.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHP_VIRTUAL_FOLDER
The QHP_VIRTUAL_FOLDER
tag specifies the namespace to use when generating Qt Help Project output. For more information please see Qt Help Project / Virtual Folders.
The default value is: doc
.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHP_CUST_FILTER_NAME
If the QHP_CUST_FILTER_NAME
tag is set, it specifies the name of a custom filter to add. For more information please see Qt Help Project / Custom Filters.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHP_CUST_FILTER_ATTRS
The QHP_CUST_FILTER_ATTRS
tag specifies the list of the attributes of the custom filter to add. For more information please see Qt Help Project / Custom Filters.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHP_SECT_FILTER_ATTRS
The QHP_SECT_FILTER_ATTRS
tag specifies the list of the attributes this project's filter section matches. Qt Help Project / Filter Attributes.
This tag requires that the tag GENERATE_QHP is set to YES
.
QHG_LOCATION
The QHG_LOCATION
tag can be used to specify the location of Qt's qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the generated .qhp
file.
This tag requires that the tag GENERATE_QHP is set to YES
.
GENERATE_ECLIPSEHELP
If the GENERATE_ECLIPSEHELP
tag is set to YES
, additional index files will be generated, together with the HTML files, they form an Eclipse
help plugin.
To install this plugin and make it available under the help contents menu in Eclipse
, the contents of the directory containing the HTML and XML files needs to be copied into the plugins directory of eclipse. The name of the directory within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
After copying Eclipse
needs to be restarted before the help appears.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
ECLIPSE_DOC_ID
A unique identifier for the Eclipse
help plugin. When installing the plugin the directory name containing the HTML and XML files should also have this name. Each documentation set should have its own identifier.
The default value is: org.doxygen.Project
.
This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES
.
DISABLE_INDEX
If you want full control over the layout of the generated HTML pages it might be necessary to disable the index and replace it with your own. The DISABLE_INDEX
tag can be used to turn on/off the condensed index (tabs) at top of each HTML page. A value of NO
enables the index and the value YES
disables it. Since the tabs in the index contain the same information as the navigation tree, you can set this option to YES
if you also set GENERATE_TREEVIEW to YES
.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
GENERATE_TREEVIEW
The GENERATE_TREEVIEW
tag is used to specify whether a tree-like index structure should be generated to display hierarchical information. If the tag value is set to YES
, a side panel will be generated containing a tree-like index structure (just like the one that is generated for HTML Help). For this to work a browser that supports JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). Windows users are probably better off using the HTML help feature.
Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can further fine-tune the look of the index. As an example, the default style sheet generated by doxygen has an example that shows how to put an image at the root of the tree instead of the PROJECT_NAME.
Since the tree basically has the same information as the tab index, you could consider setting DISABLE_INDEX to YES
when enabling this option.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
ENUM_VALUES_PER_LINE
The ENUM_VALUES_PER_LINE
tag can be used to set the number of enum values that doxygen will group on one line in the generated HTML documentation.
Note that a value of 0 will completely suppress the enum values from appearing in the overview section.
Minimum value: 0
, maximum value: 20
, default value: 4
.
This tag requires that the tag GENERATE_HTML is set to YES
.
TREEVIEW_WIDTH
If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used to set the initial width (in pixels) of the frame in which the tree is shown.
Minimum value: 0
, maximum value: 1500
, default value: 250
.
This tag requires that the tag GENERATE_HTML is set to YES
.
EXT_LINKS_IN_WINDOW
If the EXT_LINKS_IN_WINDOW
option is set to YES
, doxygen will open links to external symbols imported via tag files in a separate window.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
FORMULA_FONTSIZE
Use this tag to change the font size of formulas included as images in the HTML documentation. When you change the font size after a successful doxygen run you need to manually remove any form_*.png
images from the HTML output directory to force them to be regenerated.
Minimum value: 8
, maximum value: 50
, default value: 10
.
This tag requires that the tag GENERATE_HTML is set to YES
.
FORMULA_TRANSPARENT
Use the FORMULA_TRANSPARENT
tag to determine whether or not the images generated for formulas are transparent PNGs. Transparent PNGs are not supported properly for IE 6.0, but are supported on all modern browsers.
Note that when changing this option you need to delete any form_*.png
files in the HTML output directory before the changes have effect.
The default value is: YES
.
This tag requires that the tag GENERATE_HTML is set to YES
.
FORMULA_MACROFILE
The FORMULA_MACROFILE
can contain \newcommand
and \renewcommand
commands to create new commands to be used in formulas as building blocks. See the section Including formulas for details.
USE_MATHJAX
Enable the USE_MATHJAX
option to render formulas using MathJax (see https://www.mathjax.org) which uses client side JavaScript for the rendering instead of using pre-rendered bitmaps. Use this if you do not have installed or if you want to formulas look prettier in the HTML output. When enabled you may also need to install MathJax separately and configure the path to it using the MATHJAX_RELPATH option.
The default value is: NO
.
This tag requires that the tag GENERATE_HTML is set to YES
.
MATHJAX_FORMAT
When MathJax is enabled you can set the default output format to be used for the MathJax output. See the MathJax site for more details.
Possible values are: HTML-CSS
(which is slower, but has the best compatibility), NativeMML
(i.e. MathML) and SVG
.
The default value is: HTML-CSS
.
This tag requires that the tag USE_MATHJAX is set to YES
.
MATHJAX_RELPATH
When MathJax is enabled you need to specify the location relative to the HTML output directory using the MATHJAX_RELPATH
option. The destination directory should contain the MathJax.js
script. For instance, if the mathjax
directory is located at the same level as the HTML output directory, then MATHJAX_RELPATH
should be ../mathjax
. The default value points to the MathJax Content Delivery Network so you can quickly see the result without installing MathJax. However, it is strongly recommended to install a local copy of MathJax from https://www.mathjax.org before deployment.
The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/
.
This tag requires that the tag USE_MATHJAX is set to YES
.
MATHJAX_EXTENSIONS
The MATHJAX_EXTENSIONS
tag can be used to specify one or more MathJax extension names that should be enabled during MathJax rendering. For example
MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
This tag requires that the tag USE_MATHJAX is set to YES
.
MATHJAX_CODEFILE
The MATHJAX_CODEFILE
tag can be used to specify a file with javascript pieces of code that will be used on startup of the MathJax code. See the MathJax site for more details. As an example to disable the "Math Renderer" menu item in the "Math
Settings" menu of MathJax:
MATHJAX_CODEFILE = disableRenderer.js
with in the file disableRenderer.js
:
MathJax.Hub.Config({ menuSettings: { showRenderer: false, } });
This tag requires that the tag USE_MATHJAX is set to YES
.
SEARCHENGINE
When the SEARCHENGINE
tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should typically be disabled. For large projects the javascript based search engine can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
It is possible to search using the keyboard; to jump to the search box use <access key> + S
(what the <access key>
is depends on the OS and browser, but it is typically <CTRL>
, <ALT>
/<option>
, or both). Inside the search box use the <cursor down key>
to jump into the search results window, the results can be navigated using the <cursor keys>
. Press <Enter>
to select an item or <escape>
to cancel the search. The filter options can be selected when the cursor is inside the search box by pressing <Shift>+<cursor down>
. Also here use the <cursor keys>
to select a filter and <Enter>
or <escape>
to activate or cancel the filter option.
The default value is: YES
.
This tag requires that the tag GENERATE_HTML is set to YES
.
SERVER_BASED_SEARCH
When the SERVER_BASED_SEARCH
tag is enabled the search engine will be implemented using a web server instead of a web client using JavaScript.
There are two flavors of web server based searching depending on the EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for searching and an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing and searching needs to be provided by external tools. See the section External Indexing and Searching for details.
The default value is: NO
.
This tag requires that the tag SEARCHENGINE is set to YES
.
EXTERNAL_SEARCH
When EXTERNAL_SEARCH
tag is enabled doxygen will no longer generate the PHP script for searching. Instead the search results are written to an XML file which needs to be processed by an external indexer. Doxygen will invoke an external search engine pointed to by the SEARCHENGINE_URL option to obtain the search results.
Doxygen ships with an example indexer (doxyindexer
) and search engine (doxysearch.cgi
) which are based on the open source search engine library Xapian.
See the section External Indexing and Searching for details.
The default value is: NO
.
This tag requires that the tag SEARCHENGINE is set to YES
.
SEARCHENGINE_URL
The SEARCHENGINE_URL
should point to a search engine hosted by a web server which will return the search results when EXTERNAL_SEARCH is enabled.
Doxygen ships with an example indexer (doxyindexer
) and search engine (doxysearch.cgi
) which are based on the open source search engine library Xapian. See the section External Indexing and Searching for details.
This tag requires that the tag SEARCHENGINE is set to YES
.
SEARCHDATA_FILE
When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed search data is written to a file for indexing by an external tool. With the SEARCHDATA_FILE
tag the name of this file can be specified.
The default file is: searchdata.xml
.
This tag requires that the tag SEARCHENGINE is set to YES
.
EXTERNAL_SEARCH_ID
When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the EXTERNAL_SEARCH_ID
tag can be used as an identifier for the project. This is useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple projects and redirect the results back to the right project.
This tag requires that the tag SEARCHENGINE is set to YES
.
EXTRA_SEARCH_MAPPINGS
The EXTRA_SEARCH_MAPPINGS
tag can be used to enable searching through doxygen projects other than the one defined by this configuration file, but that are all added to the same external search index. Each project needs to have a unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of to a relative location where the documentation can be found.
The format is:
EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
This tag requires that the tag SEARCHENGINE is set to YES
.
GENERATE_LATEX
If the GENERATE_LATEX
tag is set to YES
, doxygen will generate output.
The default value is: YES
.
LATEX_OUTPUT
The LATEX_OUTPUT
tag is used to specify where the docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.
The default directory is: latex
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_CMD_NAME
The LATEX_CMD_NAME
tag can be used to specify the command name to be invoked.
Note that when not enabling USE_PDFLATEX the default is latex
when enabling USE_PDFLATEX the default is pdflatex
and when in the later case latex
is chosen this is overwritten by pdflatex
. For specific output languages the default can have been set differently, this depends on the implementation of the output language.
This tag requires that the tag GENERATE_LATEX is set to YES
.
MAKEINDEX_CMD_NAME
The MAKEINDEX_CMD_NAME
tag can be used to specify the command name to generate index for .
Makefile
/ make.bat
. .tex
).The default file is: makeindex
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_MAKEINDEX_CMD
The LATEX_MAKEINDEX_CMD
tag can be used to specify the command name to generate index for . In case there is no backslash (\
) as first character it will be automatically added in the code.
.tex
). Makefile
/ make.bat
.The default value is: makeindex
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
COMPACT_LATEX
If the COMPACT_LATEX
tag is set to YES
, doxygen generates more compact documents. This may be useful for small projects and may help to save some trees in general.
The default value is: NO
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
PAPER_TYPE
The PAPER_TYPE
tag can be used to set the paper type that is used by the printer.
Possible values are: a4
(210 x 297 mm), letter
(8.5 x 11 inches), legal
(8.5 x 14 inches) and executive
(7.25 x 10.5 inches).
The default value is: a4
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
EXTRA_PACKAGES
The EXTRA_PACKAGES
tag can be used to specify one or more package names that should be included in the output. The package can be specified just by its name or with the correct syntax as to be used with the \usepackage
command.
To get the times
font for instance you can specify :
EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
To use the option intlimits
with the amsmath
package you can specify:
EXTRA_PACKAGES=[intlimits]{amsmath}
If left blank no extra packages will be included.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_HEADER
The LATEX_HEADER
tag can be used to specify a personal header for the generated document. The header should contain everything until the first chapter.
If it is left blank doxygen will generate a standard header. See section Doxygen usage for information on how to let doxygen write the default header to a separate file.
Note: Only use a user-defined header if you know what you are doing!
The following commands have a special meaning inside the header: $title
, $datetime
, $date
, $doxygenversion
, $projectname
, $projectnumber
, $projectbrief
, $projectlogo
. Doxygen will replace $title
with the empty string, for the replacement values of the other commands the user is referred to HTML_HEADER.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_FOOTER
The LATEX_FOOTER
tag can be used to specify a personal footer for the generated document. The footer should contain everything after the last chapter. If it is left blank doxygen will generate a standard footer. See LATEX_HEADER for more information on how to generate a default footer and what special commands can be used inside the footer.
Note: Only use a user-defined footer if you know what you are doing!
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_EXTRA_STYLESHEET
LATEX_EXTRA_STYLESHEET
tag can be used to specify additional user-defined style sheets that are included after the standard style sheets created by doxygen. Using this option one can overrule certain style aspects. Doxygen will copy the style sheet files to the output directory. YES
. LATEX_EXTRA_FILES
The LATEX_EXTRA_FILES
tag can be used to specify one or more extra images or other source files which should be copied to the LATEX_OUTPUT output directory. Note that the files will be copied as-is; there are no commands or markers available.
This tag requires that the tag GENERATE_LATEX is set to YES
.
PDF_HYPERLINKS
If the PDF_HYPERLINKS
tag is set to YES
, the that is generated is prepared for conversion to PDF (using ps2pdf
or pdflatex
). The PDF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using a PDF viewer.
The default value is: YES
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
USE_PDFLATEX
If the USE_PDFLATEX
tag is set to YES
, doxygen will use pdflatex
to generate the PDF file directly from the files. Set this option to YES
, to get a higher quality PDF documentation.
The default value is: YES
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_BATCHMODE
If the LATEX_BATCHMODE
tag is set to YES
, doxygen will add the \batchmode
command to the generated files. This will instruct to keep running if errors occur, instead of asking the user for help. This option is also used when generating formulas in HTML.
The default value is: NO
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_HIDE_INDICES
If the LATEX_HIDE_INDICES
tag is set to YES
then doxygen will not include the index chapters (such as File Index, Compound Index, etc.) in the output.
The default value is: NO
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_SOURCE_CODE
If the LATEX_SOURCE_CODE
tag is set to YES
then doxygen will include source code with syntax highlighting in the output.
Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
The default value is: NO
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_BIB_STYLE
The LATEX_BIB_STYLE
tag can be used to specify the style to use for the bibliography, e.g. plainnat
, or ieeetr
. See https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
The default value is: plain
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_TIMESTAMP
If the LATEX_TIMESTAMP
tag is set to YES
then the footer of each generated page will contain the date and time when the page was generated. Setting this to NO
can help when comparing the output of multiple runs.
The default value is: NO
.
This tag requires that the tag GENERATE_LATEX is set to YES
.
LATEX_EMOJI_DIRECTORY
The LATEX_EMOJI_DIRECTORY
tag is used to specify the (relative or absolute) path from which the emoji images will be read. If a relative path is entered, it will be relative to the LATEX_OUTPUT directory. If left blank the LATEX_OUTPUT directory will be used.
This tag requires that the tag GENERATE_LATEX is set to YES
.
GENERATE_RTF
If the GENERATE_RTF
tag is set to YES
, doxygen will generate RTF output. The RTF output is optimized for Word 97 and may not look too pretty with other RTF readers/editors.
The default value is: NO
.
RTF_OUTPUT
The RTF_OUTPUT
tag is used to specify where the RTF docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.
The default directory is: rtf
.
This tag requires that the tag GENERATE_RTF is set to YES
.
COMPACT_RTF
If the COMPACT_RTF
tag is set to YES
, doxygen generates more compact RTF documents. This may be useful for small projects and may help to save some trees in general.
The default value is: NO
.
This tag requires that the tag GENERATE_RTF is set to YES
.
RTF_HYPERLINKS
If the RTF_HYPERLINKS
tag is set to YES
, the RTF that is generated will contain hyperlink fields. The RTF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using Word or some other Word compatible readers that support those fields.
Note: WordPad (write) and others do not support links.
The default value is: NO
.
This tag requires that the tag GENERATE_RTF is set to YES
.
RTF_STYLESHEET_FILE
Load stylesheet definitions from file. Syntax is similar to doxygen's configuration file, i.e. a series of assignments. You only have to provide replacements, missing definitions are set to their default value.
See also section Doxygen usage for information on how to generate the default style sheet that doxygen normally uses.
This tag requires that the tag GENERATE_RTF is set to YES
.
RTF_EXTENSIONS_FILE
Set optional variables used in the generation of an RTF document. Syntax is similar to doxygen's configuration file. A template extensions file can be generated using doxygen -e rtf extensionFile
.
This tag requires that the tag GENERATE_RTF is set to YES
.
RTF_SOURCE_CODE
If the RTF_SOURCE_CODE
tag is set to YES
then doxygen will include source code with syntax highlighting in the RTF output.
Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
The default value is: NO
.
This tag requires that the tag GENERATE_RTF is set to YES
.
GENERATE_MAN
If the GENERATE_MAN
tag is set to YES
, doxygen will generate man pages for classes and files.
The default value is: NO
.
MAN_OUTPUT
The MAN_OUTPUT
tag is used to specify where the man pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. A directory man3
will be created inside the directory specified by MAN_OUTPUT
.
The default directory is: man
.
This tag requires that the tag GENERATE_MAN is set to YES
.
MAN_EXTENSION
The MAN_EXTENSION
tag determines the extension that is added to the generated man pages. In case the manual section does not start with a number, the number 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION
tag is optional.
The default value is: .3
.
This tag requires that the tag GENERATE_MAN is set to YES
.
MAN_SUBDIR
The MAN_SUBDIR
tag determines the name of the directory created within MAN_OUTPUT
in which the man pages are placed. If defaults to man followed by MAN_EXTENSION
with the initial . removed.
This tag requires that the tag GENERATE_MAN is set to YES
.
MAN_LINKS
If the MAN_LINKS
tag is set to YES
and doxygen generates man output, then it will generate one additional man file for each entity documented in the real man page(s). These additional files only source the real man page, but without them the man
command would be unable to find the correct page.
The default value is: NO
.
This tag requires that the tag GENERATE_MAN is set to YES
.
GENERATE_XML
If the GENERATE_XML
tag is set to YES
, doxygen will generate an XML file that captures the structure of the code including all documentation.
The default value is: NO
.
XML_OUTPUT
The XML_OUTPUT
tag is used to specify where the XML pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.
The default directory is: xml
.
This tag requires that the tag GENERATE_XML is set to YES
.
XML_PROGRAMLISTING
If the XML_PROGRAMLISTING
tag is set to YES
, doxygen will dump the program listings (including syntax highlighting and cross-referencing information) to the XML output. Note that enabling this will significantly increase the size of the XML output.
The default value is: YES
.
This tag requires that the tag GENERATE_XML is set to YES
.
XML_NS_MEMB_FILE_SCOPE
If the XML_NS_MEMB_FILE_SCOPE
tag is set to YES
, doxygen will include namespace members in file scope as well, matching the HTML output.
The default value is: NO
.
This tag requires that the tag GENERATE_XML is set to YES
.
GENERATE_DOCBOOK
If the GENERATE_DOCBOOK
tag is set to YES
, doxygen will generate Docbook files that can be used to generate PDF.
The default value is: NO
.
DOCBOOK_OUTPUT
The DOCBOOK_OUTPUT
tag is used to specify where the Docbook pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.
The default directory is: docbook
.
This tag requires that the tag GENERATE_DOCBOOK is set to YES
.
DOCBOOK_PROGRAMLISTING
If the DOCBOOK_PROGRAMLISTING
tag is set to YES
, doxygen will include the program listings (including syntax highlighting and cross-referencing information) to the DOCBOOK output. Note that enabling this will significantly increase the size of the DOCBOOK output.
The default value is: NO
.
This tag requires that the tag GENERATE_DOCBOOK is set to YES
.
GENERATE_AUTOGEN_DEF
If the GENERATE_AUTOGEN_DEF
tag is set to YES
, doxygen will generate an AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures the structure of the code including all documentation. Note that this feature is still experimental and incomplete at the moment.
The default value is: NO
.
GENERATE_PERLMOD
If the GENERATE_PERLMOD
tag is set to YES
, doxygen will generate a Perl module file that captures the structure of the code including all documentation.
Note that this feature is still experimental and incomplete at the moment.
The default value is: NO
.
PERLMOD_LATEX
If the PERLMOD_LATEX
tag is set to YES
, doxygen will generate the necessary Makefile
rules, Perl
scripts and code to be able to generate PDF and DVI output from the Perl module output.
The default value is: NO
.
This tag requires that the tag GENERATE_PERLMOD is set to YES
.
PERLMOD_PRETTY
If the PERLMOD_PRETTY
tag is set to YES
, the Perl module output will be nicely formatted so it can be parsed by a human reader. This is useful if you want to understand what is going on. On the other hand, if this tag is set to NO
, the size of the Perl module output will be much smaller and Perl will parse it just the same.
The default value is: YES
.
This tag requires that the tag GENERATE_PERLMOD is set to YES
.
PERLMOD_MAKEVAR_PREFIX
The names of the make variables in the generated doxyrules.make
file are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX
. This is useful so different doxyrules.make
files included by the same Makefile
don't overwrite each other's variables.
This tag requires that the tag GENERATE_PERLMOD is set to YES
.
ENABLE_PREPROCESSING
If the ENABLE_PREPROCESSING
tag is set to YES
, doxygen will evaluate all C-preprocessor directives found in the sources and include files.
The default value is: YES
.
MACRO_EXPANSION
If the MACRO_EXPANSION
tag is set to YES
, doxygen will expand all macro names in the source code. If set to NO
, only conditional compilation will be performed. Macro expansion can be done in a controlled way by setting EXPAND_ONLY_PREDEF to YES
.
The default value is: NO
.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
EXPAND_ONLY_PREDEF
If the EXPAND_ONLY_PREDEF
and MACRO_EXPANSION tags are both set to YES
then the macro expansion is limited to the macros specified with the PREDEFINED and EXPAND_AS_DEFINED tags.
The default value is: NO
.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
SEARCH_INCLUDES
If the SEARCH_INCLUDES
tag is set to YES
, the include files in the INCLUDE_PATH will be searched if a #include
is found.
The default value is: YES
.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
INCLUDE_PATH
The INCLUDE_PATH
tag can be used to specify one or more directories that contain include files that are not input files but should be processed by the preprocessor.
This tag requires that the tag SEARCH_INCLUDES is set to YES
.
INCLUDE_FILE_PATTERNS
You can use the INCLUDE_FILE_PATTERNS
tag to specify one or more wildcard patterns (like *.h
and *.hpp
) to filter out the header-files in the directories. If left blank, the patterns specified with FILE_PATTERNS will be used.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
PREDEFINED
The PREDEFINED
tag can be used to specify one or more macro names that are defined before the preprocessor is started (similar to the -D
option of e.g. gcc
). The argument of the tag is a list of macros of the form: name
or name=definition
(no spaces). If the definition and the "="
are omitted, "=1"
is assumed. To prevent a macro definition from being undefined via #undef
or recursively expanded use the :=
operator instead of the =
operator.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
EXPAND_AS_DEFINED
If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES
then this tag can be used to specify a list of macro names that should be expanded. The macro definition that is found in the sources will be used. Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
SKIP_FUNCTION_MACROS
If the SKIP_FUNCTION_MACROS
tag is set to YES
then doxygen's preprocessor will remove all references to function-like macros that are alone on a line, have an all uppercase name, and do not end with a semicolon. Such function macros are typically used for boiler-plate code, and will confuse the parser if not removed.
The default value is: YES
.
This tag requires that the tag ENABLE_PREPROCESSING is set to YES
.
TAGFILES
The TAGFILES
tag can be used to specify one or more tag files.
For each tag file the location of the external documentation should be added. The format of a tag file without this location is as follows:
TAGFILES = file1 file2 ...
Adding location for the tag files is done as follows:
TAGFILES = file1=loc1 "file2 = loc2" ...
where loc1
and loc2
can be relative or absolute paths or URLs. See the section Linking to external documentation for more information about the use of tag files.
GENERATE_TAGFILE
When a file name is specified after GENERATE_TAGFILE
, doxygen will create a tag file that is based on the input files it reads. See section Linking to external documentation for more information about the usage of tag files.
ALLEXTERNALS
If the ALLEXTERNALS
tag is set to YES
, all external class will be listed in the class index. If set to NO
, only the inherited external classes will be listed.
The default value is: NO
.
EXTERNAL_GROUPS
If the EXTERNAL_GROUPS
tag is set to YES
, all external groups will be listed in the modules index. If set to NO
, only the current project's groups will be listed.
The default value is: YES
.
EXTERNAL_PAGES
If the EXTERNAL_PAGES
tag is set to YES
, all external pages will be listed in the related pages index. If set to NO
, only the current project's pages will be listed.
The default value is: YES
.
CLASS_DIAGRAMS
If the CLASS_DIAGRAMS
tag is set to YES
, doxygen will generate a class diagram (in HTML and ) for classes with base or super classes. Setting the tag to NO
turns the diagrams off. Note that this option also works with HAVE_DOT disabled, but it is recommended to install and use dot
, since it yields more powerful graphs.
The default value is: YES
.
DIA_PATH
You can include diagrams made with dia in doxygen documentation. Doxygen will then run dia to produce the diagram and insert it in the documentation. The DIA_PATH tag allows you to specify the directory where the dia binary resides. If left empty dia is assumed to be found in the default search path.
HIDE_UNDOC_RELATIONS
If set to YES
the inheritance and collaboration graphs will hide inheritance and usage relations if the target is undocumented or is not a class.
The default value is: YES
.
HAVE_DOT
If you set the HAVE_DOT
tag to YES
then doxygen will assume the dot
tool is available from the path
. This tool is part of Graphviz, a graph visualization toolkit from AT&T and Lucent Bell Labs. The other options in this section have no effect if this option is set to NO
The default value is: YES
.
DOT_NUM_THREADS
The DOT_NUM_THREADS
specifies the number of dot
invocations doxygen is allowed to run in parallel. When set to 0
doxygen will base this on the number of processors available in the system. You can set it explicitly to a value larger than 0 to get control over the balance between CPU load and processing speed.
Minimum value: 0
, maximum value: 32
, default value: 0
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_FONTNAME
When you want a differently looking font in the dot files that doxygen generates you can specify the font name using DOT_FONTNAME
. You need to make sure dot is able to find the font, which can be done by putting it in a standard location or by setting the DOTFONTPATH
environment variable or by setting DOT_FONTPATH to the directory containing the font.
The default value is: Helvetica
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_FONTSIZE
The DOT_FONTSIZE
tag can be used to set the size (in points) of the font of dot graphs.
Minimum value: 4
, maximum value: 24
, default value: 10
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_FONTPATH
By default doxygen will tell dot
to use the default font as specified with DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set the path where dot
can find it using this tag.
This tag requires that the tag HAVE_DOT is set to YES
.
CLASS_GRAPH
If the CLASS_GRAPH
tag is set to YES
then doxygen will generate a graph for each documented class showing the direct and indirect inheritance relations. Setting this tag to YES
will force the CLASS_DIAGRAMS tag to NO
.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
COLLABORATION_GRAPH
If the COLLABORATION_GRAPH
tag is set to YES
then doxygen will generate a graph for each documented class showing the direct and indirect implementation dependencies (inheritance, containment, and class references variables) of the class with other documented classes.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
GROUP_GRAPHS
If the GROUP_GRAPHS
tag is set to YES
then doxygen will generate a graph for groups, showing the direct groups dependencies.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
UML_LOOK
If the UML_LOOK
tag is set to YES
, doxygen will generate inheritance and collaboration diagrams in a style similar to the OMG's Unified Modeling Language.
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
UML_LIMIT_NUM_FIELDS
If the UML_LOOK tag is enabled, the fields and methods are shown inside the class node. If there are many fields or methods and many nodes the graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
threshold limits the number of items for each type to make the size more manageable. Set this to 0 for no limit. Note that the threshold may be exceeded by 50% before the limit is enforced. So when you set the threshold to 10, up to 15 fields may appear, but if the number exceeds 15, the total amount of fields shown is limited to 10.
Minimum value: 0
, maximum value: 100
, default value: 10
.
This tag requires that the tag HAVE_DOT is set to YES
.
TEMPLATE_RELATIONS
If the TEMPLATE_RELATIONS
tag is set to YES
then the inheritance and collaboration graphs will show the relations between templates and their instances.
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
INCLUDE_GRAPH
If the INCLUDE_GRAPH
, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to YES
then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
INCLUDED_BY_GRAPH
If the INCLUDED_BY_GRAPH
, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to YES
then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
CALL_GRAPH
If the CALL_GRAPH
tag is set to YES
then doxygen will generate a call dependency graph for every global function or class method.
Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable call graphs for selected functions only using the \callgraph command. Disabling a call graph can be accomplished by means of the command \hidecallgraph.
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
CALLER_GRAPH
If the CALLER_GRAPH
tag is set to YES
then doxygen will generate a caller dependency graph for every global function or class method.
Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable caller graphs for selected functions only using the \callergraph command. Disabling a caller graph can be accomplished by means of the command \hidecallergraph.
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
GRAPHICAL_HIERARCHY
If the GRAPHICAL_HIERARCHY
tag is set to YES
then doxygen will graphical hierarchy of all classes instead of a textual one.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
DIRECTORY_GRAPH
If the DIRECTORY_GRAPH
tag is set to YES
then doxygen will show the dependencies a directory has on other directories in a graphical way. The dependency relations are determined by the #include
relations between the files in the directories.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_IMAGE_FORMAT
The DOT_IMAGE_FORMAT
tag can be used to set the image format of the images generated by dot
. For an explanation of the image formats see the section output formats in the documentation of the dot
tool (Graphviz).
svg
you need to set HTML_FILE_EXTENSION to xhtml
in order to make the SVG files visible in IE 9+ (other browsers do not have this requirement).Possible values are: png
, png:cairo
, png:cairo:cairo
, png:cairo:gd
, png:gd
, png:gd:gd
, jpg
, jpg:cairo
, jpg:cairo:gd
, jpg:gd
, jpg:gd:gd
, gif
, gif:cairo
, gif:cairo:gd
, gif:gd
, gif:gd:gd
, svg
, png:gd
, png:gd:gd
, png:cairo
, png:cairo:gd
, png:cairo:cairo
, png:cairo:gdiplus
, png:gdiplus
and png:gdiplus:gdiplus
.
The default value is: png
.
This tag requires that the tag HAVE_DOT is set to YES
.
INTERACTIVE_SVG
If DOT_IMAGE_FORMAT is set to svg
, then this option can be set to YES
to enable generation of interactive SVG images that allow zooming and panning.
Note that this requires a modern browser other than Internet Explorer. Tested and working are Firefox, Chrome, Safari, and Opera.
xhtml
in order to make the SVG files visible. Older versions of IE do not have SVG support.The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_PATH
The DOT_PATH
tag can be used to specify the path where the dot
tool can be found. If left blank, it is assumed the dot
tool can be found in the path
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOTFILE_DIRS
The DOTFILE_DIRS
tag can be used to specify one or more directories that contain dot files that are included in the documentation (see the \dotfile command).
This tag requires that the tag HAVE_DOT is set to YES
.
MSCFILE_DIRS
The MSCFILE_DIRS
tag can be used to specify one or more directories that contain msc files that are included in the documentation (see the \mscfile command).
DIAFILE_DIRS
The DIAFILE_DIRS
tag can be used to specify one or more directories that contain dia files that are included in the documentation (see the \diafile command).
PLANTUML_JAR_PATH
When using plantuml, the PLANTUML_JAR_PATH
tag should be used to specify the path where java can find the plantuml.jar
file. If left blank, it is assumed PlantUML is not used or called during a preprocessing step. Doxygen will generate a warning when it encounters a \startuml command in this case and will not generate output for the diagram.
PLANTUML_CFG_FILE
When using plantuml, the PLANTUML_CFG_FILE
tag can be used to specify a configuration file for plantuml.
PLANTUML_INCLUDE_PATH
When using plantuml, the specified paths are searched for files specified by the !include
statement in a plantuml block.
DOT_GRAPH_MAX_NODES
The DOT_GRAPH_MAX_NODES
tag can be used to set the maximum number of nodes that will be shown in the graph. If the number of nodes in a graph becomes larger than this value, doxygen will truncate the graph, which is visualized by representing a node as a red box. Note that doxygen if the number of direct children of the root node in a graph is already larger than DOT_GRAPH_MAX_NODES
then the graph will not be shown at all. Also note that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
Minimum value: 0
, maximum value: 10000
, default value: 50
.
This tag requires that the tag HAVE_DOT is set to YES
.
MAX_DOT_GRAPH_DEPTH
The MAX_DOT_GRAPH_DEPTH
tag can be used to set the maximum depth of the graphs generated by dot
. A depth value of 3 means that only nodes reachable from the root by following a path via at most 3 edges will be shown. Nodes that lay further from the root node will be omitted. Note that setting this option to 1 or 2 may greatly reduce the computation time needed for large code bases. Also note that the size of a graph can be further restricted by DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
Minimum value: 0
, maximum value: 1000
, default value: 0
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_TRANSPARENT
Set the DOT_TRANSPARENT
tag to YES
to generate images with a transparent background. This is disabled by default, because dot on Windows does not seem to support this out of the box.
Warning: Depending on the platform used, enabling this option may lead to badly anti-aliased labels on the edges of a graph (i.e. they become hard to read).
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_MULTI_TARGETS
Set the DOT_MULTI_TARGETS
tag to YES
to allow dot to generate multiple output files in one run (i.e. multiple -o and -T options on the command line). This makes dot
run faster, but since only newer versions of dot
(>1.8.10) support this, this feature is disabled by default.
The default value is: NO
.
This tag requires that the tag HAVE_DOT is set to YES
.
GENERATE_LEGEND
If the GENERATE_LEGEND
tag is set to YES
doxygen will generate a legend page explaining the meaning of the various boxes and arrows in the dot generated graphs.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
DOT_CLEANUP
If the DOT_CLEANUP
tag is set to YES
, doxygen will remove the intermediate dot files that are used to generate the various graphs.
The default value is: YES
.
This tag requires that the tag HAVE_DOT is set to YES
.
Suppose you have a simple project consisting of two files: a source file example.cc
and a header file example.h
. Then a minimal configuration file is as simple as:
INPUT = example.cc example.h
Assuming the example makes use of Qt classes and perl
is located in /usr/bin
, a more realistic configuration file would be:
PROJECT_NAME = Example INPUT = example.cc example.h WARNINGS = YES TAGFILES = qt.tag SEARCHENGINE = NO
To generate the documentation for the QdbtTabular package I have used the following configuration file:
PROJECT_NAME = QdbtTabular OUTPUT_DIRECTORY = html WARNINGS = YES INPUT = examples/examples.doc src FILE_PATTERNS = *.cc *.h INCLUDE_PATH = examples TAGFILES = qt.tag SEARCHENGINE = YES
To regenerate the Qt-1.44 documentation from the sources, you could use the following configuration file:
PROJECT_NAME = Qt OUTPUT_DIRECTORY = qt_docs HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES ENABLE_PREPROCESSING = YES MACRO_EXPANSION = YES EXPAND_ONLY_PREDEF = YES SEARCH_INCLUDES = YES FULL_PATH_NAMES = YES STRIP_FROM_PATH = $(QTDIR)/ PREDEFINED = USE_TEMPLATECLASS Q_EXPORT= \ QArrayT:=QArray \ QListT:=QList \ QDictT:=QDict \ QQueueT:=QQueue \ QVectorT:=QVector \ QPtrDictT:=QPtrDict \ QIntDictT:=QIntDict \ QStackT:=QStack \ QDictIteratorT:=QDictIterator \ QListIteratorT:=QListIterator \ QCacheT:=QCache \ QCacheIteratorT:=QCacheIterator \ QIntCacheT:=QIntCache \ QIntCacheIteratorT:=QIntCacheIterator \ QIntDictIteratorT:=QIntDictIterator \ QPtrDictIteratorT:=QPtrDictIterator INPUT = $(QTDIR)/doc \ $(QTDIR)/src/widgets \ $(QTDIR)/src/kernel \ $(QTDIR)/src/dialogs \ $(QTDIR)/src/tools FILE_PATTERNS = *.cpp *.h q*.doc INCLUDE_PATH = $(QTDIR)/include RECURSIVE = YES
For the Qt-2.1 sources I recommend to use the following settings:
PROJECT_NAME = Qt PROJECT_NUMBER = 2.1 HIDE_UNDOC_MEMBERS = YES HIDE_UNDOC_CLASSES = YES SOURCE_BROWSER = YES INPUT = $(QTDIR)/src FILE_PATTERNS = *.cpp *.h q*.doc RECURSIVE = YES EXCLUDE_PATTERNS = *codec.cpp moc_* */compat/* */3rdparty/* ALPHABETICAL_INDEX = YES COLS_IN_ALPHA_INDEX = 3 IGNORE_PREFIX = Q ENABLE_PREPROCESSING = YES MACRO_EXPANSION = YES INCLUDE_PATH = $(QTDIR)/include PREDEFINED = Q_PROPERTY(x)= \ Q_OVERRIDE(x)= \ Q_EXPORT= \ Q_ENUMS(x)= \ "QT_STATIC_CONST=static const " \ _WS_X11_ \ INCLUDE_MENUITEM_DEF EXPAND_ONLY_PREDEF = YES EXPAND_AS_DEFINED = Q_OBJECT_FAKE Q_OBJECT ACTIVATE_SIGNAL_WITH_PARAM \ Q_VARIANT_AS
Here doxygen's preprocessor is used to substitute some macro names that are normally substituted by the C preprocessor, but without doing full macro expansion.